AJ Alberts Plumbing and Water Conditioning Logo 651-738-0580
A.J. Alberts Plumbing service van at a Twin Cities home, locally owned and operated since 1989

Water Conditioning

Water Softener Installation in Andover, MN

Andover water tests at 20 grains per gallon, that is extremely hard, well above the threshold where damage to plumbing and appliances starts. A.J. Alberts sizes, valves, and programs softeners specifically for Andover's water. Free in-home water test before any quote.

Call 651-738-0580

Quick Summary

A.J. Alberts installs water softeners in Andover, MN. Local water is 20 gpg (extremely hard). Recommended system: Advanced or specialty water softener with 48,000-64,000 grain capacity, upflow regeneration, and metered Fleck or Clack valve. Programmer set 2-3 gpg above tested hardness to prevent bleed-through. Iron compensation of 5 gpg per 1 ppm iron detected. Free on-site test, written upfront pricing, lifetime craftsmanship warranty. Call 651-738-0580.

Water Hardness in Andover

20
grains per gallon

Extremely Hard

Anoka County, Minnesota. Andover's 20 gpg water is in the extremely hard tier. Standard hardware-store softeners cannot keep up — they regenerate constantly, waste salt and water, and let hard water bleed through to your taps. The right answer is a 48,000-64,000 grain system with upflow regeneration and a metered Fleck or Clack valve, programmed 2-3 gpg above the test reading. Local well water also commonly carries iron, which requires programmer compensation of 5 gpg per 1 ppm iron detected.

Recommended for Andover homes:

Advanced or specialty water softener with 48,000-64,000 grain capacity, upflow regeneration, and metered Fleck or Clack valve. Programmer set 2-3 gpg above tested hardness to prevent bleed-through. Iron compensation of 5 gpg per 1 ppm iron detected.

See full softener selection guide →

What Untreated 20 gpg Water Costs Your Andover Home

Appliance damage

Limescale insulates your water heater, drives up energy bills, and shortens its lifespan. Dishwashers, washing machines, and tankless heaters fail years early. The cost of one premature water heater replacement is more than a quality softener.

Plumbing clogs

Mineral deposits slowly constrict water flow inside your pipes, leading to low water pressure. Once buildup reaches a certain point, the only fix is repiping. Softening prevents the deposits from forming.

Cleaning frustrations

Hard water binds to soap, leaving soap scum on shower walls, faded laundry, and white crust on faucets. You use more soap, detergent, and shampoo and get worse results.

Andover Water Softener FAQs

What size water softener do I need in Andover?
Andover water tests at 20 grains per gallon, which is extremely hard. For most Andover homes (3 to 5 people), we recommend a 48,000 to 64,000 grain capacity system with metered regeneration to avoid constant brine cycles and salt waste. We size the exact unit during the free in-home water test.
How much does water softener installation cost in Andover?
Cost in Andover varies by system capacity, valve type, and plumbing complexity. For extremely hard water like Mounds View and surrounding Andover, expect a quality install with proper sizing and programming to fall in a predictable range. A.J. Alberts provides written upfront pricing after the free in-home water test. No commission-driven upsells.
How long does a water softener last in Andover?
A quality softener properly sized and programmed for Andover's 20 gpg water should last 10 to 15 years. Annual maintenance (salt checks, occasional valve service) is key to maximum lifespan. Underpowered budget units installed without proper programming rarely make it to 10 years in Andover water.
What brand of water softener does A.J. Alberts install in Andover?
We install systems built around Fleck and Clack metered control valves, which are the industry-standard valves for residential softening with the longest track record in Twin Cities water. We choose the specific system that fits your water test, household size, and budget — we do not push a single brand.
How fast can A.J. Alberts install a softener in Andover?
From free water test to completed installation is typically one to two weeks in Andover depending on system selection and parts. Emergency replacement (failed softener leaking, no soft water, etc.) is often same-day. Call 651-738-0580.

Ready for a Andover Softener Install?

Schedule a free in-home water test. We will give you the exact hardness reading and recommend the right system in writing.

Schedule Free Water Test Call 651-738-0580