AJ Alberts Plumbing and Water Conditioning Logo 651-738-0580
A.J. Alberts Plumbing service van at a Twin Cities home, locally owned and operated since 1989

Faucet Repair and Fixture Installation in Woodbury and the East Metro

A dripping faucet, a cartridge that will not shut off, low flow at one tap, a leak at the faucet base, a running toilet, or a new sink, toilet, or shower valve to install: A.J. Alberts plumbers repair and install every bathroom and kitchen fixture from our Woodbury shop across the East Metro. Licensed plumbers, written upfront pricing, a lifetime craftsmanship warranty, and zero commissioned salespeople, since 1989.

Call 651-738-0580

Quick Summary

Faucet repair and replacement (drips, cartridges, low flow, leaks at the base, outdoor spigots), toilet repair and installation (TOTO, Kohler, and all major brands), sink and vanity installation in every style, and shower valve replacement, done by the same licensed plumbers who run our remodel work for East Metro design-build contractors. Written upfront pricing, lifetime craftsmanship warranty. Call 651-738-0580.

Faucet Repair: Drips, Cartridges, Low Flow, and Leaks at the Base

Most faucet calls are one of five problems. A drip from the spout when the handle is off is a worn cartridge, ceramic disc, or, in an older two-handle faucet, a compression washer and seat. A handle that has to be forced to shut off is a cartridge that is failing or a seat that is scored. Low flow at one faucet while the rest of the house is fine is almost always a clogged aerator or a cartridge packed with mineral scale, which East Metro hardness produces quickly. Water at the base of the faucet or under the sink is a failed O-ring, a loose supply connection, or a cracked faucet body. A faucet that sprays or sputters is air or debris in the line, often after work on the water main.

When the cartridge or repair kit is on the truck, a repair that is worth doing is finished the same visit; otherwise we order the part and schedule the return. When the valve body itself is corroded or the faucet is a discontinued model with no parts, we say so and quote a replacement in writing next to the repair price. We install the faucet you have already bought or supply one, and we check the shutoff valves under the sink at the same time, because a stop valve that will not close is the reason a small faucet job becomes a flood.

Outdoor spigots are faucets too. A hose bib that drips, will not shut off, or split over the winter is replaced with a frost-free sillcock set at the correct pitch, and we show you how to drain it each fall.

Toilets, Sinks, and Showers

A running toilet, a toilet that rocks, a sink that drains slowly or leaks at the trap, or a shower that drips from the head when it is off are the next most common calls. Toilet repairs are usually a flapper, fill valve, or flush valve; a toilet that rocks needs its flange and seal checked before the floor is damaged. Shower drips are the valve cartridge inside the wall, which is plumbing work rather than a cosmetic fix. The sections below cover installation of each fixture type, including the sink styles and the toilet brands we install most.

Every Sink Style, Installed Right

The sink style determines the plumbing work behind it. Here is what each involves, honestly.

Drop-in (self-rimming)

The simplest swap. Sits in a counter cutout with the rim on top. Most repairs and replacements are same-visit work.

Undermount

Mounted beneath stone or solid-surface counters for a clean look. Requires proper support and sealing; failure means a sink in the cabinet.

Corner sink

The small-bathroom space saver. Usually means relocating supply lines and the drain into the corner, which is in-wall plumbing work we handle routinely.

Wall-mounted

Floats with no vanity. Needs in-wall carrier support and concealed drain rough-in at the right height. Plan it during a remodel, not after the tile is up.

Console

A smaller footprint than a vanity with exposed legs and plumbing, which means the supply and drain finish work is visible and has to look good.

Vessel

Bowl-on-counter look. Needs a tall or wall-mount faucet and the right drain (usually no overflow), details that trip up generic installs.

Toilet Installation, Including TOTO

Our remodel plumber Dan Pearson installs TOTO toilets as part of his work with Twin Cities design-build contractors. Discuss the model, fit and manufacturer requirements before choosing a fixture. Water conditions alone do not establish how long a toilet or its components will last.

A proper toilet install is more than setting the bowl: correct rough-in measurement (10, 12, or 14 inch), a new wax ring or waxless seal, a solid flange (rotted or broken flanges are the most common surprise in older Twin Cities homes), supply line replacement, and shimming and caulking so the bowl never rocks. If your flange is below the finished floor level after a tile job, we fix that properly with a flange extender instead of stacking wax rings.

When comparing fixtures, consider the specific model, fit, service parts and manufacturer requirements alongside your budget. Installation quality matters as well as the product selected.

Faucet and Shower Valve Brands We Install

We install and repair Delta, Moen, Kohler, Grohe, Hansgrohe, Brizo, Rohl, Watermark, and other major fixture brands, following manufacturer specs so the warranty stays intact. Shower valve replacement (the part inside the wall) is the job that most often turns a cosmetic bathroom refresh into real plumbing, and it is core work for us.

Hard water can leave mineral deposits, but water conditions vary by supply and existing treatment. An inspection should establish the cause of a fixture problem before recommending parts or water treatment. Check the exact fixture manufacturer's maintenance and warranty terms. USGS explains water hardness and mineral deposits.

Faucet and Fixture Work Across Woodbury and the East Metro

A.J. Alberts is based at 7975 Afton Road in Woodbury and sends plumbers across the East Metro and the St. Croix Valley every day, from Oakdale, Lake Elmo, and Maplewood to Cottage Grove, Stillwater, White Bear Lake, and Hudson, Wisconsin, where we hold a Wisconsin plumbing license. Pick your city for the plumber who covers it and the local notes.

Faucet Repair and Fixture Installation FAQs

How much does bathroom sink repair or replacement cost?
Simple repairs (a new cartridge, a pop-up assembly, a trap leak) are quick visits with written upfront pricing before work begins. Full sink replacement depends on the sink style: a drop-in swap is straightforward, while undermount, wall-mount, and console sinks involve counter or wall work. We quote in writing after seeing the job. No commissioned salespeople, so the quote is for what you need, not what pays the most.
Are TOTO toilets worth the price?
In our experience installing them across the Twin Cities, yes. TOTO build quality, glaze, and flush engineering are consistently excellent, and warranty issues are rare. Our lead remodel plumber Dan Pearson installs TOTO toilets on most of his remodel projects. That said, we install all major brands and will give you an honest comparison for your budget; a well-installed mid-range toilet beats a poorly installed premium one every time.
What is the best sink style for a small bathroom?
Corner sinks and wall-mounted sinks are the two space-saving champions. A corner sink uses the one spot most small bathrooms waste, and a wall-mount frees up floor area and makes cleaning easier. Console sinks split the difference with a smaller footprint than a vanity while still offering some surface. The plumbing consideration: wall-mount and corner installs often require relocating supply lines and the drain inside the wall, which is exactly the work we do.
Can you replace a faucet without replacing the sink?
Almost always yes, as long as the new faucet matches the hole configuration of the sink or counter (single-hole, centerset 4 inch, or widespread 8 inch). We install Delta, Moen, Kohler, Grohe, Hansgrohe, Brizo, and other major brands, and we will tell you if your chosen faucet will not fit before anything gets ordered.
Why does my new faucet or fixture fail early in the Twin Cities?
A symptom does not establish its cause. Hard water can leave mineral deposits, but a leaking or poorly performing fixture also needs inspection. Check the actual water conditions and the fixture manufacturer's requirements before selecting treatment or replacement parts. No treatment guarantees a particular fixture life.
How do I know if my faucet needs a new cartridge or a new faucet?
If the faucet body is sound and parts are available, a cartridge fixes a drip or a stiff handle and the faucet has years left. If the body is corroded, the finish is failing, or the model is discontinued with no parts, replacement is the better spend. We quote both in writing so you can compare.
Why does only one faucet in my house have low water pressure?
When the rest of the house is fine, the problem is at that faucet: a clogged aerator, a cartridge scaled up by hard water, or a partly closed supply stop under the sink. Whole-house low pressure is a different problem, usually the pressure reducing valve or the water service line, and it gets a different repair.
Can you fix an outdoor faucet that drips or froze over the winter?
Yes. A hose bib that drips or split in a freeze is replaced with a frost-free sillcock installed at the right pitch so it drains itself. Disconnect hoses every fall; a hose left on a frost-free spigot is the most common reason they split anyway.
Do you install customer-supplied fixtures?
Yes. If you have already bought your sink, faucet, or toilet, we will install it with the same written pricing and lifetime craftsmanship warranty on our work. We will also flag any compatibility problem (wrong rough-in size, mismatched hole pattern) before we start, not after.

Fixture Problem or Upgrade in Mind?

Written upfront pricing, installed by licensed plumbers, covered by a lifetime craftsmanship warranty. No commissioned salespeople.

Call 651-738-0580